The Blade Inline DHP System is an electrical device. Please read, understand, and follow all safety instructions and considerations in this manual prior to use of your Blade Inline DHP System. Retain these instructions for future reference and take all necessary precautions to reduce the risk of fire, electric shock, explosion, or injury.
| Specifications | |
| Weight | 2.27Kg |
| Material | 18 Gauge Stainless Steel |
| Color | Stainless Steel |
| Dimensions | Width: 21.84cm Height: 27.69cm Depth: 17.27cm |
Safety + Warranty
The DHP Limited Warranty applies only if the unit is used in accordance with these instructions. Only use genuine Synexis parts and sails to ensure the proper functioning of your unit and to maintain your warranty.
✔ All HVAC, Electrical, Bulb, and Sail replacement must be performed by a qualified technician.
✔ It is recommended that a switch be installed to de-energize the Blade Inline unit for service and maintenance.
✔ This device is designed for a closed duct system. Do not mount it near a return air opening.
✔ This device is designed for indoor installation only (i.e. attics, basements, etc.). It is for use in the duct work of gas fired, oil fired, electric and split system heat pump forced air systems. It is NOT designed to be mounted outside on gas fired or heat pump packaged units.
✔ Split system heat pumps are systems where the air handler and the air conditioning compressor are separate units.
✔ Packaged units are systems where the air handler and air conditioning compressor are built together and installed outside the building.
✔ Do not touch the electrical components with wet hands.
✔ Do not use outdoors or in a wet environment. This device is for indoor, dry location use only.
✔ Do not submerge the Blade Inline system in water.
✔ To prevent water damage or electric shock, do not mount this device under a humidifier.
✔ Do not use any combustible or flammable items on or near the Blade Inline system.
✔ Do not spill or spray any liquids or aerosols into the Blade Inline system or on the DHP Technology Sail.
✔ Do not place the Blade Inline system near a heat source.
✔ Do not modify or attempt to modify this product.
✔ Contact Bentz Jaz Biodefense Team at +65 88192823.
Getting The Best Performance From Your System
✔ Proper number of units to cover your square footage The Synexis Blade Inline DHP system is easy to use. Make sure the proper number of units are installed for the size of the HVAC system and for the square footage of the facility. In some cases, multiple Synexis units may be necessary. Be sure to change the sail according to the recommended replacement schedule. Leave the replacement sail in its plastic bag and store it in a dark, dry location until you need to replace the current sail in your Synexis Blade Inline DHP system.
✔ Doors and windows closed The Synexis Blade Inline DHP system is designed for enclosed spaces, so it is important to keep all external windows and doors closed as much as possible. Open windows and/or doors can significantly reduce the efficiency of your system by allowing the DHP to dissipate out of the facility.
✔ Continuous operation 24/7/365 The Synexis Blade Inline DHP system is designed to operate 24 hours a day, 7 days a week. DHP is meant to be a continuous clean technology as opposed to a temporary clean technology. The DHP molecule is delicate and safe at low concentration. Producing it continuously ensures a proper equilibrium concentration in your space for effective decontamination.
✔ Maintain a proper cleaning and replacement schedule Do not try to repair or adjust any of the electrical components in your Synexis Blade Inline system yourself. Contact Contact Bentz Jaz Biodefense Team at +65 88192823 for assistance and any questions you have about what is covered by your warranty.
